电沉积制备的PtNi纳米粒子用于氧还原反应:成核和生长机理

质子交换膜燃料电池(PEMFCs)电堆中阴极Pt基催化剂的高用量造成其成本居高不下,成为阻碍燃料电池汽车商业化推进的重要原因,因此开发低Pt、高活性的Pt基催化剂势在必行.Pt合金催化剂能够有效地降低Pt用量,并通过对合金颗粒的元素比例、晶面、粒径等实行精确调控,显著提升氧还原(ORR)催化活性.然而,目前常用的制备方法由于原料与制备成本高昂、过程复杂大都难以适应规模化生产需求.电化学方法通过控制施加的电流或电位控制晶体生长.在水体系中该方法已得到验证,但由于Pt化合物的热力学标准电极电位与过渡金属元素之间相差较大,且对于过渡金属来说,电负性大多小于铂,因此还原电位通常负于析氢电位,使得二者难以实现共沉积.有机体系中电位窗口比水体系大得多,Pt与电位较负的过渡金属可实现共沉积,采用小分子有机溶剂也可避免溶剂清洗问题,具有应用潜力.本文提出了一种简单的一步电沉积方法,选择易溶于水的N,N-二甲基甲酰胺(DMF)作为溶剂,将碳载体滴涂到玻碳电极上作为工作电极,通过电化学方法直接将Pt-Ni合金沉积到碳载体上,并利用物化表征与密度泛函理论(DFT)理论计算来探究共沉积机理.透射电镜表征结果表明,在不同的沉积电位下均可得到分散均匀、粒径适当的催化剂;且随着电位值降低,催化剂颗粒分散得更均匀,颗粒粒径不断减小.元素分布和晶面结果表明,铂镍元素均匀分布于颗粒中.所有样品均表现出优异的ORR性能,最高的面积比活性达到商业催化剂的6.85倍.将材料表征、电化学表征与DFT计算结合,建立起了铂镍合金生长过程的模型,并发现了有机体系中独特的成核-生长机理.将体系中的DMF换成超纯水,用同样的方法进行沉积,得到的催化剂颗粒团聚严重,说明DMF的使用能够避免颗粒团聚.在单独铂的体系中沉积发现,负载量极小,表明体系中镍前驱体的添加对于催化剂的沉积过程起到重要作用.电化学表征结果表明,在所选用的DMF有机体系中,镍的还原电位与铂的十分接近,但还原动力学更慢,趋向于先形成吸附原子后快速还原.由此可以推测,在二者合金的形成过程中,镍在碳载体表面的缓慢还原而形成的吸附原子能够成为铂还原的活性位点,从而降低了铂还原成核所需的能量,使得载体上的成核位点大大增加,这与DFT模拟结果一致.DFT建立了碳上镍的位点和铂的位点,分别在上面进行铂的还原,发现镍位点上比铂位点上更容易实现铂沉积.本文提出了铂镍共沉积的机理:在过电位(即还原能量)下,铂的还原动力学较镍稍快,于是铂先还原形成晶核,但难以达到生长的临界半径,于是单独铂体系中的沉积负载量很少.载体上还原的镍为铂还原提供了大量的活性位点,促进了铂还原,并与镍共沉积.Pt-Ni表面则进一步促进了铂的沉积和颗粒的生长.综上,本文提出了一种用于制备铂合金催化剂的有机电沉积体系,实现了单分散的碳载铂镍合金催化剂的一步制备.随后,本文将材料表征、电化学表征与DFT计算相结合,建立起了有机体系中铂镍合金成核-生长过程的机理模型.     

过氧化氢生产与利用的新进展

过氧化氢既可用作环境友好的绿色氧化剂,也可用作燃料电池中的太阳能燃料,因而受到越来越多的关注.本文综述了太阳能驱动分子氧氧化水制备过氧化氢及其作为绿色氧化剂和燃料的研究进展.利用太阳能将水的e^-和4e^-氧化与分子氧的e^-还原相结合,使光催化生产过氧化氢成为可能;本文讨论了与e^-和4e^-水氧化选择性及e^-和4e^-氧还原选择性相关的催化反应控制.由于光催化e^-氧化水和e^-还原分子氧的过程都产生过氧化氢,因此该组合的催化效率较高.太阳能光驱动水氧化及分子氧还原生产过氧化氢与过氧化氢催化氧化底物相结合,在该过程中分子氧用作最环保的氧化剂.     

乙炔氢氯化反应中的负载金-离子液体催化剂:离子态金物种的稳定机制

聚氯乙烯(PVC)作为世界通用工程塑料之一,具有优异的物理、化学和机械性能,在工业、农业、建筑、包装、电力等行业中应用广泛.氯乙烯是生产聚氯乙烯的重要单体.氯乙烯的生产主要有电石法和乙烯法两种工艺路线,由于我国“贫油、富煤、少气”的资源现状,电石法产能占全部产能的83%以上.电石法生产氯乙烯的原理是在氯化汞催化剂存在下,将电石水解精制后的乙炔气与氯化氢加成直接合成氯乙烯.随着节能减排及环保要求的逐渐提高和国际涉汞公约的实施,开发新一代绿色无汞催化剂具有重要的战略意义.近年来,金基催化剂是无汞催化剂基础研究和技术开发中最重要的方向.在之前的工作中,我们课题组首先报道了负载离子液体-金催化剂体系(Au-SILP)在电石法生产氯乙烯工艺中的应用,并发现离子液体的存在可以显著提高金活性物种在载体表面的分散度和稳定其化学价态.在后续研究中,我们在负载离子液体-金催化体系中引入金属铜离子(Cu^2+),利用反应过程中Au-Cu之间的氧化还原循环,设计并制备了金属铜基配位离子液体,构建了负载离子液体-金-铜催化剂体系.铜离子的引入形成了一个催化剂自身维持氧化态的微环境,实现了被还原金物种的原位氧化再生.本文在上述研究基础上,利用配位离子液体[Bmim][N(CN)2]中[N(CN)2^–]阴离子和阳离子金之间的强配位作用,构建出比Au-Cl键更稳定的Au–N键,并通过X射线光电子能谱(XPS)、球差校正-扫描透射电镜(AC-STEM)和扩展X射线吸收精细结构(EXAFS)表征证明了Au以单原子状态存在于载体表面.制备的Au-N(CN)2/AC催化剂在乙炔氢氯化反应中表现出比Au-Cl/AC和Au/AC催化剂更高的稳定性和催化活性以及更短的诱导期.进一步表征分析发现,[N(CN)2^–]配体促进了阳离子金和配体之间的电子转移,提高了阳离子金的电子云密度,削弱了乙炔在阳离子金上的吸附强度,抑制了其还原,提高了催化剂的稳定性.更重要的是,与阳离子金配位的[N(CN)2^–]配体使得反应过程中的氯化氢在氮位点发生化学解离,促进了氯化氢活化,同时降低了反应能垒.对负载配位离子液体-金催化体系反应诱导期的分析结果表明,反应诱导期与反应物(乙炔、氯化氢)分子在离子液体层中的溶解度无关,而主要取决于催化剂中Au(Ⅲ)物种的含量和反应物分子在离子液体中的扩散速率.上述研究结果进一步深化了离子液体和活性金物种之间电子的作用机理,建立了负载离子液体-金催化剂体系对反应物的活化机制和反应机理,为进一步开发具有工业应用价值的乙炔氢氯化反应无汞催化剂提供了科学基础和参考.     

固态电解质中锂离子传输机理研究进展

固态电解质在室温下表现出非凡的离子导电性,使其有潜力应用于全固态锂离子电池。开发新的高性能固态电解质需要对锂离子传输机理及其规律进行深入研究。本文论述了近期研究中锂离子传输机理方面的研究进展,包括离子传输理论基础的概述;总结Li₁₀GeP₂S₁₂、Li₇La₃Zr₂O₁₂和Li_1+xAl_xTi_2-x(PO₄)₃固态电解质材料中晶体结构、离子传输和研究进展;阐述锂离子传输中结构特征、传输机理（单离子跳跃传输和多离子协同传输）以及构效关系;总结（反）Meyer-Neldel规则的关键问题和相关电解质材料。最后,展望了给出电解质材料的设计策略和未来机理研究的重点,为无机固态电解质材料的探索提供新的思路和方向。     

Restriction of Intramolecular Motion(RIM): Investigating AIE Mechanism from Experimental and Theoretical Studies

Mechanistic studies promote scientific development from phenomena to theories.Aggregation-induced emission(AIE),as an unusual photophysical phenomenon,builds the bridge between molecular science and aggregate mesoscience.With the twenty-year development of AIE,restriction of intramolecular motion(RIM)has been verified as the working mechanism of AIE effect.In this review,these mechanistic works about RIM are summarized from experimental and theoretical perspectives.Thereinto,the experimental studies are introduced from three parts:external rigidification,structural modification and structural characterization.In the theoretical part,calculations on the low-frequency motion of AIEgens have been performed to prove the RIM mechanism.By virtue of the theoretical calculations,some new mechanisms are proposed to supplement the RIM,such as restriction of access to conical intersection,suppression of Kasha transition,restriction of access to dark state,etc.It is foreseeable that the RIM mechanism will unify the photophysical theories for both molecules and aggregates,and inspire more progress in aggregate science.     

Bee Venom in Wound Healing

Bee venom (BV), also known as api-toxin, is widely used in the treatment of different inflammatory diseases such as rheumatoid arthritis or multiple sclerosis. It is also known that BV can improve the wound healing process. BV plays a crucial role in the modulation of the different phases of wound repair. It possesses anti-inflammatory, antioxidant, antifungal, antiviral, antimicrobial and analgesic properties, all of which have a positive impact on the wound healing process. The mentioned process consists of four phases, i.e., hemostasis, inflammation, proliferation and remodeling. The impaired wound healing process constitutes a significant problem especially in diabetic patients, due to hypoxia state. It had been found that BV accelerated the wound healing in diabetic patients as well as in laboratory animals by impairing the caspase-3, caspase-8 and caspase-9 activity. Moreover, the activity of BV in wound healing is associated with regulating the expression of transforming growth factor (TGF-β1), vascular endothelial growth factor and increased collagen type I. BV stimulates the proliferation and migration of human epidermal keratinocytes and fibroblasts. In combination with polyvinyl alcohol and chitosan, BV significantly accelerates the wound healing process, increasing the hydroxyproline and glutathione and lowering the IL-6 level in wound tissues. The effect of BV on the wounds has been proved by numerous studies, which revealed that BV in the wound healing process brings about a curative effect and could be applied as a new potential treatment for wound repair. However, therapy with bee venom may induce allergic reactions, so it is necessary to assess the existence of the patient’s hypersensitivity to apitoxin before treatment.     

Flavone-Rich Fractions and Extracts from Oroxylum indicum and Their Antibacterial Activities against Clinically Isolated Zoonotic Bacteria and Free Radical Scavenging Effects

Oroxylum indicum extracts from the seeds collected from Lampang and Pattani provinces in Thailand, and young fruits and flowers exhibited in vitro display antioxidant and antibacterial activities against clinically isolated zoonotic bacteria including Staphylococcus intermedius, Streptococcus suis, Pseudomonas aeruginosa, β-hemolytic Escherichia coli and Staphylococcus aureus. The orange crystals and yellow precipitates were obtained from the preparation processes of the seed extracts. The orange-red crystals from the seeds collected from Lampang province exhibited strong in vitro 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging effects (EC₅₀ value = 25.99 ± 3.30 μg/mL) and antibacterial effects on S. intermedius and β-hemolytic E. coli while the yellow precipitate from the same source exhibited only antioxidant activity. Quantitative analysis of phytochemicals in O. indicum samples by spectrophotometric and HPLC techniques showed that they contained different amounts of total phenolic, total flavonoid and three major flavones; baicalin, baicalein and chrysin contents. Young fruit extract, which contained low amounts of flavone contents, still promoted antibacterial effects against the tested bacteria with IC₅₀ values lower than 1 mg/mL and MIC values between 4 to 10 mg/mL in S. intermedius, S. aureus and S suis while higher IC₅₀ and MIC values against P. aeruginosa and β-hemolytic E. coli were found. From scanning electron microscopy, the extract of the young fruit of O. indicum promoted morphological changes in the bacterial cells by disrupting the bacterial cell walls, inducing leakage of the cellular content, and generating the abnormal accumulation of cells. The mechanism of action of the extract for this antibacterial effect may be the disruption of the cell membrane and abnormal cell aggregations. Regression analysis of the results suggests the correlation between total phenolic and total flavonoid contents and antioxidant and antibacterial effects. Baicalin was found to have a high correlation with an inhibitory effect against β-hemolytic E. coli while three unidentified peaks, which could be flavones, showed high correlations with an inhibitory effect against S. intermedius, S. suis, P. aeruginosa and S. aureus.     

金属锂负极的成核机制与载体修饰

金属锂具有电位低、比容量高等突出优点,是极具吸引力的下一代高能量密度电池的负极材料,然而存在枝晶、死锂、副反应严重、库伦效率低、循环稳定性差等问题,限制了其实际应用。金属锂负极的成核是电化学沉积过程中的重要步骤,锂在集流体或导电载体上的均匀成核和稳定生长对于抑制枝晶死锂、提高充放电效率和循环性能具有关键作用。本文从成核机制与载体效应的角度概述了锂金属负极的研究进展,介绍了锂成核驱动力、异相成核模型、空间电荷模型等内容,分析了锂核尺寸及分布与过电位和电流密度的关系,并通过三维载体分散电流密度、异相晶核/电场诱导成核、晶格匹配等方面的研究实例讨论了载体修饰对锂负极的性能提升。     

地方城市空间要素规划建设时序研究:以清代台湾省为例*

Cr/PNP催化乙烯选择性齐聚反应制短链线性α-烯烃(LAOs)技术是近年来发展极为迅速的研究方向,其中关于反应微观机理的研究对高性能催化剂设计和研发具有重要意义.通过使用量子化学计算与实验相结合的方法,可以获得对催化反应过程更为深刻的认识.我们主要从理论计算研究的角度,总结了铬系催化剂催化乙烯选择性齐聚研究中取得的最新成果.主要内容包括反应过程中催化剂的氧化态[Cr(Ⅰ/Ⅲ) vs Cr(Ⅱ/Ⅳ)],反应路径中单乙烯和双乙烯配位的竞争,配体的空间结构和电子效应,自然键轨道理论(NBO)以及H_2效应对催化体系的影响等.     

d-f跃迁发光稀土配合物研究进展

稀土配合物独特的发光性质使其在众多领域有很大的应用价值。其中, d-f跃迁发光稀土配合物具有跃迁宇称允许、激发态寿命短和光谱可调等特点,但相关研究还有待进一步深入。本文介绍了稀土配合物的发光机制,综述了具有d-f跃迁发光性质的稀土配合物(主要是Ce³⁺, Eu²⁺, Yb²⁺和Sm²⁺配合物)的研究进展,并初步总结了配合物分子结构对d-f跃迁发光性质的影响规律。